Pencil Holder

search

Pencil Holder

By Lonnie Kester from Krylon

Paint any plastic cup to transform it into a handy pencil holder.

Painted Pencil Holder

Materials:

  • Krylon Fusion for Plastic® - Fairytale Pink (#2331)
  • Plastic cup
  • Ammonia-based cleaner or paint thinner
  • Drop cloth
  • Low-tack masking tape
  • Drop cloth

Steps:

  1. Using ammonia-based cleaner, wipe down pencil holder to remove any dust or particles. If the plastic is new, wipe down with paint thinner for best results.
     
  2. Completely tape off any area that you do not wanted painted. A low tack tape is preferred.
     
  3. Shake Fusion can for 2 minutes or more.
     
  4. Applying in a well ventilated area, hold can 8" to 10" from surface and spray in a sweeping motion from side to side.
     
  5. EZ Touch Fan Spray tip can be adjusted to spray vertically or horizontally – see back label instructions.
     
  6. Apply a thin coat and allow to dry for 30 seconds.
     
  7. Apply multiple thin coats until surface is completely covered.
     
  8. Remove tape immediately after spraying.
     
  9. Fusion dries in 15 minutes or less, and can be handled in about 1 hour.
     
  10. Fusion must cure a full 7 days to become fully chip and scratch resistant.


For more project ideas, please visit www.krylon.com/projects.

Your Recently Viewed Projects

Leave a Comment

Rate

Cancel Reply to Comment

Thanks for your comment. Don't forget to share!

Close

Report Inappropriate Comment

Are you sure you would like to report this comment? It will be flagged for our moderators to take action.

Thank you for taking the time to improve the content on our site.

Close Window