Silky Honey

search

Silky Honey

Use Swarovski Rondelles and Rounds to create a simple but sophisticated looking necklace. This design is fitting to wear for a casual evening.

Materials:

  • Seven 6mm Silk Swarovski rondelles
  • Twenty-six 5mm Jet AB Swarovski rounds
  • Six 6mm Crystal Copper Swarovski rounds
  • Sterling EZ-Crimp Toggle Clasp
  • Beadalon 19 Strand
  • .015” Silver Plated Wire
  • Mighty Crimp Tool
  • Designer Flush Cutters

Steps:

  1. Cut a 28” length of Silver Plated wire.
     
  2. Attach wire to EZ Crimp end by sliding wire inside crimp end and securing with crimp tool.
     
  3. Measure down .5” and slide a jet bead on wire. Slide wire over and back through jet bead forming a tight loop to secure bead on wire, tighten loop so it is flush to the jet bead, slide on a crystal copper bead, slide a second jet bead against the crystal copper and loop wire through it as before, pulling tight. The beads should be flush to one another.
     
  4. Measure down approx. .5” and repeat process, replacing the crystal copper bead in the center with a silk rondelle.
     
  5. Repeat this pattern until you reach the final segment. Slide wire into EZ Crimp clasp crimp tube and secure with crimp tool as before.
     
  6. Use flush cutters to remove any exposed wire from inside of EZ Crimp tube end.
     
  7. Work your way back through the design to ensure all segments are flush together.

Your Recently Viewed Projects

Leave a Comment

Rate

Cancel Reply to Comment

Thanks for your comment. Don't forget to share!

Close

Report Inappropriate Comment

Are you sure you would like to report this comment? It will be flagged for our moderators to take action.

Thank you for taking the time to improve the content on our site.

Close Window