Gorgeous Floral Ring

search

Gorgeous Floral Ring

If you ever imagine yourself wearing some bling then this is the best craft for you. Create your very own floral ring from AMACO. In only eight steps this ring can be on your finger making all your friends want one.

Materials:

  • Friendly Plastic 7” sticks: in colors of your choice.
  • Mat knife
  • Non-stick baking sheet that fits flat on griddle surface
  • Cutting mat
  • Craft knife
  • Scissor
  • Acrylic ruler
  • Needle tool
  • 3/4” round shaped cutter:
  • Small dish of cold water with a few drops of olive oil
  • Griddle set at 200-300 degrees
  • Heat tool
  • Sealer: I used Envirotex Lite, but any high gloss acrylic sealer will work.
  • Disposable mixing container and stir stick
  • Straw
  • Non-stick cookie sheet
  • Adjustable ring blanks
  • 3/4” square silver filigree
  • Small filigree flowers
  • Crystal rhinestones: optional
  • E6ooo glue

 

Instructions:

  1. Fracture: Using a cutting mat, ruler and blade, cut the plastic sticks into 1/4” and 1/8” strips. Then cut the strips in half using a scissor. Cut enough strips in order to create an interesting color pattern.
     
  2. Fusion: Pre heat the griddle. Place the baking sheet onto the griddle. One at a time, in the color pattern shown, or one of your own. place the plastic strips onto the baking sheet. Make sure each strip is stuck in place before adding the next. Try to press each strip tightly against the one before, to prevent any gaps. Continue until all of the strips have been added. Allow the plastic to soften and seal together. If any gaps do appear, simply tap over them with your finger pressing the softened plastic together. When all the strips have softened and sealed together, remove the baking sheet from the griddle and allow the plastic to cool. Use the needle tool to press under the edges of the cooled plastic and remove it from the pan.
     
  3. Fracture: Place the cooled plastic back on the cutting mat and trim off the two uneven edges. Continue to cut the plastic into random widths, until the entire piece has been cut apart.
     
  4. Flip every other strip in reverse, revealing what the finished fractured pattern will look like. Play around with the different size strips until you have the desired pattern. The finished piece only needs to be larger enough to accommodate the number of circle cut-outs that you want.
     
  5. Fusion: Place the baking sheet back onto the griddle. One at a time, in the pattern you have arranged, place the plastic strips onto the baking sheet. Make sure each strip is stuck in place before adding the next strip. Try to press each strip tightly against the one before, to prevent any gaps. Continue until all of the strips have been added. Allow the plastic to soften and seal together. If any gaps do appear, remember to tap over them with your finger pressing the softened plastic together. When all the strips have softened and sealed together, remove the baking sheet from the griddle.
     
  6. While the plastic is still warm, cut the circles by pressing the cutter into the softened plastic. Dip the cutter back into the cold water after each cut. This will help keep it from sticking to the plastic. Allow the plastic to cool. You may place the pan under cold running water to speed the cooling process along. Use the needle tool to press under the edges of the cooled plastic and remove it from the pan. Pop out the circles. If needed use the craft knife to cut around each one.
     
  7. Mix the Envirotex lite sealer following the manufactures instructions. Application: I like to place my pieces on a non stick cookie sheet. This way if there is any run off, it will be easy to remove later. Once I have the Envirotex mixed, I like to pour it into a small squeeze bottle. The application will be more precise and much easier. Once the resin has been applied, blow softly through a straw over each piece to pop any bubbles that remain. Allow the pieces to dry at least 12 hours. If there has been any run off. Remove the piece from the pan by pressing the needle tool under it and lifting. The resin is still soft enough that you can cut the excess off with a scissor. Envirotex cures completely in 24 hours.
     
  8. Position and glue the filigree square onto the ring blank. Next glue the plastic circle into the center of the filigree. Finish by adhere the filigree flower onto the center of the friendly plastic circle. Add a crystal rhinestone if desired. Allow the glue to dry.
     


Variation: Try using different color combinations and different types of filigree designs to create your very own unique look.


www.AMACO.com
 

 

Your Recently Viewed Projects

Leave a Comment

Rate

Cancel Reply to Comment

Thanks for your comment. Don't forget to share!

Close

Report Inappropriate Comment

Are you sure you would like to report this comment? It will be flagged for our moderators to take action.

Thank you for taking the time to improve the content on our site.

Trending Now

Close Window