FaveCrafts.com

Menu

Free Offer
Low-Cost Clothing Crafts

Find 32 low-cost clothing craft projects to create fashionable clothing and accessories, whether you knit, crochet, sew or do none of these things.

Bonus: Get our newsletter & special offers for free. We will not share or sell your email address. View our Privacy Policy

Cute Button Shirt to Skirt

By:

You can make a skirt that any little girl will love by refashioning and sewing an old button shirt. Your little girl will have a look no one can copy with this DIY skirt.

Materials:

  • Man's dress shirt
  • 3/4" elastic
  • Fabric for ruffle
  • Buttons

Notes:

The front of this shirt has rows of pintucks sewn with different coloured threads. They only show on the inside of the shirt. The outside of the shirt shows the pintucks as seams. I want to feature the pintucks, so I am turning the fabric around and am using the inside of the shirt as the outside of the skirt.

The seams on the shirt are flat felled, so both sides look OK.

You will need to take two measurements before you begin.

  • waist
  • waist to calf (or desired length of the skirt)

Instructions:

1. Cut shirt:

  • Cut the shirt at the underarm.
  • Cut off the curved edge at the bottom

2. Close buttonhole placket:

  • Remove buttons
  • Stitch the buttonhole placket closed with two rows of stitching. I have used a contrasting coloured thread to fit in with the coloured threads on the pintucks.



3. Casing for the elastic:

  • Turn under 1/4" and press or stitch.
  • Turn 1.5".
  • Baste (hand sew) to hold in place.
  • Stitch as close as you can to the hem of the casing, leaving a 2" opening to feed the elastic into.
  • Sew another row of stitching 1/2" from the top of the skirt.

4. Inserting the elastic: I cut the elastic about 1" to 1.5" shorter than the waist measurement.

  • Attach a safety pin to the end of the elastic.
  • Feed the elastic into the casing through the opening, making sure you leave the end sticking out of the opening.
  • Remove the safety pin and stitch the elastic ends together. Overlap about 1".
  • Push the ends back into the casing.
  • Spread out the elastic so it is even all the way around.
  • Stitch the gap closed.
  • Sew through the casing and elastic at the side seams. This will prevent the elastic from twisting in the casing.

5. Determine the length:

  • Ruffle + skirt = length from waist to calf
  • Decide how wide the ruffle will be.
  • Cut the skirt to the desired length.
  • Cut extra for seam allowances and hem.

6. Ruffle:

  • Cut the ruffle 1.5 to 2 x the width of the skirt. Mine is 1.5 x the width.
  • Join the short ends of the ruffle to form a tube. Neaten edges.

7. Gathering stitches:

  • Set your machine to the longest straight stitch (machine basting stitch)
  • Do NOT backstitch and leave the threads hanging.
  • Sew a row of stitching 1/4" from the edge, going from one side seam to the second side seam on the ruffle
  • Sew a row of stitching 1/4" from the edge, going from the second side seam back to the first side seam on the ruffle
  • Sew a second row of stitching 3/8" from the edge, going from one side seam to the second side seam on the ruffle
  • Sew a second row of stitching 3/8" from the edge, going from the second side seam back to the first side seam on the ruffle.

8. Pin ruffle to skirt:

  • Mark the centre front and centre back of the skirt.
  • Mark the centre front and centre back of the ruffle.
  • With right sides together, pin the ruffle to the skirt at the side seams, the centre front and the centre back.

9. Making the gathers:

  • Pull the two bobbin threads and move the fabric towards the centre front.
  • Pull until the fabric is the same length as the skirt.
  • Tie a knot in the two bobbin threads.
  • Even out the gathers and pin.

10. Repeat three times pulling the threads from each side seam to the centre.

11. Sew ruffle to skirt:

  • With needle and thread, sew the ruffle to the skirt, with long stitches (hand basting stitch).
  • Remove all pins.
  • Set machine back to normal stitch length for straight stitch.
  • Sew between the two lines of machine basting.
  • Remove both rows of machine basting (bobbin and upper threads) and the hand basting.
  • Neaten the edges by overlocking (serging) or zig zag. 


Sewing two lines of machine basting, makes it less likely for the thread to break as you pull the gathers and it also makes it easy to sew over the gathers so they remain neat.

12. Topstitching:

  • Press the seam towards the skirt.
  • Set machine stitch slightly longer than normal. My topstitching is 2.8.
  • On the right side of the skirt, sew a row of stitching about 1/8" from the seam. This will hold the seam in place and gives a nice finish.

13. Hem the bottom edge of the ruffle:

  • Turn under 1/4" and either press or stitch.
  • Turn under 1/2" and stitch.

14. Buttons: As they are only decorative, I have chosen buttons which are obviously larger than the original buttons. These buttons came from a pre-loved cardigan, which is now in the dress up box. Sew the buttons onto the buttonhole placket, covering the buttonholes.

Your refashion is finished!

Your Recently Viewed Projects

Love these projects? Get MORE delivered to your Inbox – FREE Click Here!

Ratings & Comments (0)

All fields required.

Rate & Comment

I have not made this yet so I cannot rate it.
Cancel Reply to Comment

Newsletter Signup

Free Newsletter!

Subscribe to our newsletter dedicated to providing the very best healthy meal ideas, cooking tips, healthy recipes & special offers.

Please Wait

Thanks for signing up

Sorry, we could not sign you up.

Something worth saving?

Register now for FREE to:

  • SAVE all your favorite crafts
  • ADD personal notes
  • QUICKLY reference your crafts

 

Connect With Us

Facebook Google Plus Instagram Twitter Pinterest
Twitter Blog Email RSS

About Us Advertise Contact Us FAQs News Keyword Index Privacy Policy Subscribe Terms of Service Unsubscribe

---- 1 ----

close

Images from other crafters

There are currently no images from other crafters.

Was This Helpful?YesNo