Little Charmer Glass Bracelet

You will want to save this glass charm bracelet from Diamond Tech for years to come! Follow these five easy steps to create a beautiful keepsake or gift.

Materials:

• FuseworksTM Kiln
• FuseworksTM Kiln Paper
• FuseworksTM Millefiori
•  FuseworksTM Gunmetal linked bracelet
• FuseworksTM Hot Mitts
• Silver Charms
• 1/8” green satin ribbon
• E6000® or other glass glue

Directions:

Step 1

Remove the lid from the FuseworksTM Kiln. Place a 2”x 2” piece of kiln paper on the
kiln base. Place 11 pieces of millefiori on top of the kiln paper.

Step 2

Set the base inside the microwave and cover with the kiln lid.

Step 3

Fuse* using the chart below. After the first time interval, open the microwave and lift the kiln lid slightly to inspect fusing process. Add additional time in 30 second increments until fused. Remove kiln from microwave using FuseworksTM Hot Mitts and place on heat resistant surface. Let cool for 30 minutes before removing the FuseworksTM kiln lid

*Every microwave oven and kiln will vary. You will need to test and log what time will be suited for your combination. This chart will give you a starting point to begin testing.

Step 4

When cooled, adhere fused millefiori cabochons to the disks of the link bracelet and allow to dry. (FIG. 4)

Step 5

Use your creativity by adding charms and ribbons to create a personalized bracelet sure to be treasured for years to come. (FIG. 5)