Follow Us on Facebook
Get updates from FaveCrafts.com posted directly to your News Feed.
Project Ideas for All Occasions From Paper to Fabric Volume 1 eCraft Creations
Basics of Glass Etching Using Etching Solution
By: Maria Nerius, FaveCrafts.com Resident Craft Expert
We are adding the craft to your Craft Projects.
The project was added to your Craft Projects.
Etching glass was originally done by sandblasting, but today we have an easier and less forceful way to decorate glass. Follow this glass etching tutorial from Maria Nerius.
Almost any piece of glass can be etched from a water glass, vase, or slab. The glass surface can be flat or curved, but if you are a beginner you want to pick a glass item that is easy to embellish and use simple designs/patterns. You use self sticking stencils for designs/patterns on glass. You can purchase pre-made designs or make your own from self sticking template plastic. Always wear plastic gloves when working with etching solution.
Etching solution is poured into a plastic container larger than the piece of glass you want to etch. If your glass item is lightweight you’ll need to weight it with marbles, rocks or water. For example a glass cup would float in the solution so it must be weighted. You don’t want any of the etching solution to get inside of the cup (etching the inside) so you need to know exactly how much solution needs to be poured into the plastic container. You do this by first placing the item in your plastic container and filling the plastic container with water to find the etching line. Once you have enough water to reach the top of the glass item, stop and remove the glass item. Now, mark an etch line on the plastic container with a marker. Remove water and dry the plastic container.
Fill marked plastic container with etching solution. Slowly lower your glass item into the solution. Most etching solutions take around 15 minutes, but read the labeling carefully. Once etching time has elapsed, lift item and rinse with running water, then clean with soap and water, and dry. Etching solution can be used over and over so pour it back into its original container. Clean your plastic container with soap and water before storing.
An easy project for etching with a solution is to take a small glass vase. Apply round label stickers to the outside of it. Prepare the etching bath and dip your vase. Remove after etching time has elapsed, rinse with running water, remove label stickers, clean with soap and water, and dry. It’s a simple design, but gives you a feel of how the etching process works.
Related Products to Buy from CutRateCrafts.com - save 15-30%
Your Recently Viewed Projects
Love these projects? Get MORE delivered to your Inbox – FREE Click Here!
Top Glass Projects