To remove glass panes, pry away molding that is holding glass in position, then scrape away putty to loosen glass pieces.
Sand surface of frame smooth with medium grit sandpaper. Wipe dust from surface with tackcloth.
Paint both sides of frame with Make It Stone!® spraying with several light coats. Let dry completely.
Apply Make It Last!®. Let dry.
Lay frame right side down on flat surface. Carefully position pre-cut mirror panels into frame openings with mirrored side facing down (can have panels cut at hardware store).
Cut foam core or cardboard to size of frame openings and place over mirrors to hold panels in place.
Use a putty knife to slide glazing points into frame, securely holding cardboard and mirror in position (option: after inserting glazing points you can also add duct tape around seams for extra security).
Turn frame over with mirror side facing up and mask off a border in each pane. Spray with Frosted Glass Finish and let dry several hours or overnight. Remove masking tape.
Attach window hanging hardware to backside of frame (2 screw-eyes and picture hanging wire).
For more project ideas, please visit www.krylon.com/projects.
