Follow Us on Facebook
Get updates from FaveCrafts.com posted directly to your News Feed.
Thanks for signing up!
Rose Chair Caddy
By: Dimensions Needlecrafts
We are adding the craft to your Craft Projects.
The project was added to your Craft Projects.
A cross-stitch rose pillowcase transforms into a handy chair caddy, perfect for storing supplies at your craft desk. With a pre-stamped design, the cross-stitch design from Dimensions is simple to create on the pillowcase. You can also create a Rose Bed Caddy on this same idea.
NOTE: All seam allowances are 1/2". Cut off the hem of the pillow case. Pin the front and back together around the stitching. Treating the front and back as one, cut out the pocket as shown below. Save the top piece for the apron back.
Press one long edge of the pocket binding 1/2" to the wrong side. Place it right side down on the wrong side of the pocket, aligning the top edges. Sew them together. Fold the binding to the right side. Stitch the folded edge of the binding to the pocket, working as close to the edge as possible.
Press the short ends of the ties 1/2" to the wrong side. Press the ties in half by bringing the long edges together. Open them up and press the long edges in to meet the fold. Refold them along the fi rst fold and stitch the layers together along the open edge. Press the seam binding pieces in the same way, but don't stitch them together. Use the calico lining to cut out one back piece from the top of the pillow case you saved. With the right sides together, sew the lining and back together at the top 17" edge. Turn right side out and press the top edge. Sew the pocket to the back.
Cover the exposed seam allowances at the top of the apron with the seam binding.
Trim the seam allowances at the bottom corners, then turn the apron right side out. Press the seams. Stitch through all layers to make three sections as shown.
Sew the ties to the seam binding at the top corners of the apron.
Related Products to Buy from CutRateCrafts.com - save 15-30%