Motif Lace Wrap

search

Motif Lace Wrap

12 Comments

Six different lace motifs are used in this feminine wrap crochet pattern. This wrap crochet pattern suggests one assembly but you can mix and match as you like with instructions to join as you go.


Crochet Motif Lace Wrap

 


Materials:

  • Yarn: Caron International's Simply Soft  (100% acrylic; 6 oz/170 g, 315 yds/288 m skein): 16 oz Shown in: #9721 Victorian Rose
  • Crochet Hook: One size US I-9 (5.5 mm) crochet hook, or size to obtain gauge
  • Yarn needle

 

 

FINISHED MEASUREMENTS: Wrap measures approximately 16"/40.5 cm wide by 80"/2.03 m long, excluding fringe

 

GAUGE: Gauge is not critical for this project; each square motif shown measures approximately 6.5”/16.5 cm 

 

SPECIAL TECHNIQUES

Beginning Cluster (Beg CL): Yo, insert hook in space indicated, yo and pull up a loop, yo and draw through 2 loops, * yo, insert hook in same space, yo and pull up a loop, yo and draw through 2 loops; repeat from * once more, yo and draw through 4 loops on hook.

Cluster (CL): Yo, insert hook in space indicated, yo and pull up a loop, yo and draw through 2 loops, * yo, insert hook in same space, yo and pull up a loop, yo and draw through 2 loops; repeat from * twice more, yo and draw through 5 loops on hook.

 

STITCHES USED

Chain (ch): Begin by making a slip knot on your hook. * Wrap the yarn around the hook (yarn over) and pull up a loop, [draw the yarn through the loop on the hook to form the first chain]. Repeat from * for number of chains required. Note: The loop on the hook is not included when counting the number of chains.

 

Double Crochet (dc): Yarn over hook, insert hook into stitch indicated, yarn over and pull up a loop, [yarn over and draw through two loops on hook] twice.

 

Half Double Crochet (hdc): Yarn over hook, insert hook into stitch indicated, yarn over and pull up a loop, yarn over and draw through all three loops on hook.

 

Single Crochet (sc): Insert hook in stitch indicated, yarn over and pull up a loop, yarn over and draw through both loops on hook.

 

Slip Stitch (slip st): Insert hook in the stitch indicated, yarn over and draw through both the stitch and the loop on the hook.

 

Treble Crochet (tr): Yarn over hook two times, insert hook in stitch indicated, yarn over and pull up a loop, [yarn over and draw through two loops] three times.

 

NOTES

  1. Six different Square Motifs are used for Wrap shown; work as given, or mix and match as desired.
  2.  Motifs are joined as-you-go in the instructions given below; if changing the arrangement of the Motifs, work Rounds 1 – 3 (4) – in other words, do not work the last (joining) round of the Square Motifs. Lay Squares on a flat surface, in desired arrangement, then work the last round of the Squares, joining as you go.
  3. Alternately – for a take-along project, work all Square Motifs without joining. Lay out in the desired arrangement, and sew together.
  4. The size of the wrap is easily adjusted; to make it shorter, use less Squares. If making longer, you may need to purchase additional yarn.
  5. Corkscrew fringe is optional, and is included in yarn requirements.
  6. Join all rounds with a slip st in st noted.

 

WRAP

Work 24 Squares (4 each of each Motif), joining Motifs as-you-go.

 

SQUARE MOTIF 1      

Chain 5, join with a slip st to form a ring.

Round 1: Ch 4 (counts as first dc, ch 1), in the ring, [dc, ch 1] 7 times, join with a slip st to third ch of beg ch-4—8 dc; 8 ch-1 spaces.

Round 2: Ch 3 (counts as first dc here and throughout), work 2 dc in same st as joining, * work 2 dc in next ch-1 space, dc in dc, 2 dc in next ch-1 space, 3 dc in next dc; repeat from * twice, work 2 dc in next ch-1 space, dc in dc, 2 dc in next ch-1 space, join in third ch of beg ch-3.

Round 3: Ch 6 (counts as first dc, ch 3 here and throughout), dc in same st as joining, * [ch 1, skip dc, dc in next dc] 3 times, ch 1, skip dc, [dc, ch 3, dc] in next dc; repeat from * twice, [ch 1, skip dc, dc in next dc] 3 times, ch 1, join in third ch of beg ch-6.

Round 4: Ch 3, * work 5 tr in next ch-3 space, dc in next dc, [ch 1, dc in next dc] 4 times; repeat from * twice, work 5 tr in next ch-3 space, dc in next dc, [ch 1, dc in next dc] 3 times, ch 1, join in third ch of beg ch-3.

Round 5: Ch 1, sc in same st as joining, ch 3, * skip 2 tr, [sc, ch 3, sc] in next tr, ch 3, skip 2 tr, sc in next dc, [ch 3, sc in next dc] 4 times, ch 3; repeat from * twice, skip 2 tr, [sc, ch 3, sc] in next tr, ch 3, skip 2 tr, sc in next dc, [ch 3, sc in next dc] 3 times, ch 3, join in first sc.

Fasten off.

 

SQUARE MOTIF 2                                                           

Chain 6, join with a slip st to form a ring.

Round 1: Ch 5 (counts as first tr, ch 1 here and throughout), work [tr in ring, ch 1] 19 times, join in fourth ch of beg ch-5—20 tr; 20 ch-1 spaces.

Round 2: Ch 1, sc in same st as joining, [ch 3, sc in next tr] 19 times, ch 3, slip st to first sc and into ch-3 space.

Round 3: Ch 5, work [tr, ch 1] 3 times in same ch-3 space, * [dc in next ch-3 space, ch 1] 4 times, [tr, ch 1] 4 times in next ch-3 space; repeat from * twice, [dc in next ch-3 space, ch 1] 4 times, slip st  to fourth ch of beg ch-5 and into next ch-1 space, next tr, and next ch-1 space.

Round 4: Ch 1, [sc, ch 3, sc] in same ch-1 space, ch 3, skip ch-1 space, [sc in next ch-1 space, ch 3] 5 times, skip   ch-1 space, sc in next ch-1 space, ch 1; holding Square 1 close to work with WS's facing each other, slip st  to corresponding ch-3 space of Square 1, ch 1, sc in same ch-1 space of Square 2, ch 1, slip st  to next ch-3 space of Square 1, ch 1, skip next ch-1 space of Square 2, [sc in next ch-1 space of Square 2, ch 1, slip st  to next ch-3 space of Square 1, ch 1] 5 times, skip ch-1 space of Square 2, sc in next ch-1 space of Square 2, ch 1, slip st  to next ch-3 space of Square 1, ch 1, sc in same ch-1 space of Square 2, ch 3, skip ch-1 space, [sc in next ch-1 space, ch 3] 5 times, skip ch-1 space, [sc, ch 3, sc] in next ch-1 space, ch 3, skip ch-1 space, [sc in next ch-1 space, ch 3] 5 times, join in first sc.

Fasten off.

 

SQUARE MOTIF 3                                                           

Chain 6, join with a slip st to form a ring.

Round 1: Ch 2, work Beg CL in ring, ch 5, [CL in ring, ch 5] 7 times, slip st  to second ch of beg ch-2 and into first ch-5 space—8 clusters; 8 ch-5 spaces.

Round 2: Ch 9 (counts as first tr, ch 5), tr in same ch-5 space, * work [dc, ch 5, dc] in next ch-5 space, [tr, ch 5, tr] in next ch-5 space; repeat from * twice, work [dc, ch 5, dc] in next ch-5 space, slip st  to fourth ch of beg ch-9 and into ch-5 space.

Round 3: Ch 3 (counts as first dc), work [2 dc, ch 3, 3 dc] in same ch-5 space, * ch 1, work 5 dc in next ch-5 space, ch 1, [3 dc, ch 3, 3 dc] in next ch-5 space; repeat from * twice, ch 1, work 5 dc in next ch-5 space, ch 1, join in third ch of beg ch-3.

Round 4: Ch 1, sc in same st as joining, ch 3, skip 2 dc, work [sc, ch 3, sc] in next ch-3 space, ch 3, skip 2 dc, sc in next dc, ch 3, [sc in next dc, ch 3, skip dc] twice, sc in next dc, ch 3, sc in next dc, ch 3, sc in next ch-3 space, ch 1; holding Square 1 close to work with WS's facing each other and as shown in diagram, slip st to corresponding ch-3 space of Square 1, ch 1, sc in same ch-3 space of Square 3, ch 1, slip st  to next ch-3 space of Square 1, ch 1, skip   2 dc, sc in next dc of Square 3, ch 1, slip st in next ch-3 space of Square 1, ch 1, sc in next dc of Square 3, ch 1, slip st  to next ch-3 space of Square 1, [ch 1, skip next dc of Square 3, sc in next dc of Square 3, ch 1, slip st  in next ch-3 space of Square 1] twice, ch 1, sc in   next dc of Square 3, ch 1, slip st  in ch-3 space of Square 1, ch 1, sc in next ch-3 space of Square 3, ch 1, slip st  to next ch-3 space of Square 1, ch 1, sc in same ch-3 space of Square 3, ch 3, skip 2 dc, sc in next dc, ch 3, [sc in next dc, ch 3, skip dc] twice, sc in next dc, ch 3, sc in next dc, ch 3, [sc, ch 3, sc] in next ch-3 space, ch 3, skip 2 dc, sc in next dc, ch 3, [sc in next dc, ch 3, skip dc] twice, sc in next dc, ch 3, join in first sc.

Fasten off.

 

SQUARE MOTIF 4                                                           

Chain 4, join with a slip st to form a ring.

Round 1: Ch 1, in ring, [sc, ch 5] 4 times, join in first sc and slip st into ch-5 space—4 ch-5 spaces.

Round 2: Ch 1, work [sc, hdc, dc, 3 tr, dc, hdc, sc] in each ch-5 space around, join in first sc, slip st into next hdc and next dc.

Round 3: Ch 1, sc in same dc, * ch 3, skip tr, work [sc, ch 3, sc] in next tr, ch 3, sc in next dc, ch 3, sc in next dc; repeat from * twice, ch 3, skip tr, [sc, ch 3, sc] in next tr, ch 3, sc in next dc, ch 3, join in first sc and slip st into ch-3 space.

Round 4: Ch 5 (counts as first dc, ch 2), * work [dc, ch 3, dc] in next ch-3 space, ch 2, dc in next ch-3 space, ch 2, [dc, ch 2, dc] in next ch-3 space, ch 2, dc in next ch-3 space, ch 2; repeat from * twice, [dc, ch 3, dc] in next ch-3 space, ch 2, dc in next ch-3 space, ch 2, [dc, ch 2, dc] in next ch-3 space, ch 2, join in third ch of beg ch-5 and slip st into ch-2 space.

Round 5: Ch 1, sc in same ch-2 space, ch 3, work [sc, ch 3, sc] in ch-3 space, [ch 3, sc in next ch-2 space] 5 times, ch 3, sc in next ch-3 space, ch 1; holding joined Squares close to work with WS's facing each other and as shown in diagram, * slip st  to corresponding ch-3 space of joined Squares, ch 1, sc in same ch-3 space of Square 4, [ch 1, slip st  to next ch-3 space of joined Squares, ch 1, sc in next ch-2 space of Square 4] 5 times, ch 1, slip st  to next ch-3 space of joined Squares, ch 1, sc in next ch-3 space of Square 4, ch 1; repeat from * once, slip st  to next ch-3 space of joined Squares, ch 1, sc in same ch-3 space of Square 4, [ch 3, sc in next ch-2 space] 4 times, ch 3, join in first sc.

Fasten off.

 

SQUARE MOTIF 5                                                           

Chain 6, join with a slip st to form a ring.

Round 1: Ch 1, work [sc in ring, ch 5] 12 times, join in first sc and slip st into ch-5 space.

Round 2: Ch 6 (counts as dc, ch 3 here and throughout), dc in same ch-5 space, work [dc, ch 3, dc] in each ch-5 space around, join in third ch of beg ch-6 and slip st into ch-3 space.

Round 3: Ch 6, dc in same ch-3 space, * work [ch 3, (sc, ch 3, sc) in next ch-3 space] twice, ch 3, work [dc, ch 3, dc] in next ch-3 space; repeat from * twice, work [ch 3, (sc, ch 3 sc) in next ch-3 space] twice, ch 3, join in third ch of beg ch-6 and slip st into ch-3 space.

Round 4: Ch 1, work [sc, ch 3, sc] in same ch-3 space, [ch 3, sc in next ch-3 space] 5 times, ch 3, sc in next ch-3 space, ch 1; holding joined Squares close to work with WS's facing each and as shown in diagram, * slip st  to corresponding ch-3 space of Square 3, ch 1, sc in same ch-3 space of Square 5, [ch 1, slip st  in next ch-3 space of Square 3, ch 1, sc in next ch-3 space of Square 5] 5 times, ch 1, slip st  to next ch-3 space of Square 3, ch 1, sc in next ch-3 space of Square 5, ch 1, slip st  to next ch-3 space of Square 3, ch 1; sc in same ch-3 space of Square 5, work [ch 3, sc in next ch-3 space] 5 times, ch 3, [sc, ch 3, sc] in next ch-3 space, work [ch 3, sc in next ch-3 space] 5 times, ch 3, join in first sc.

Fasten off.

 

SQUARE MOTIF 6                                                           

Chain 5, join with a slip st to form a ring.

Round 1: Ch 3 (counts as first dc here and throughout), work 15 dc in ring, join in third ch of beg ch-3—16 dc.

Round 2: Ch 3, dc in same st as joining, * dc in next dc, work 2 dc in next dc; repeat from * 6 times, dc in next dc, join in third ch of beg ch-3.

Round 3: Ch 5 (counts as first tr, ch 1), work [tr, ch 1] 3 times in same st as joining, * [skip dc, dc in next dc, ch 1] twice, skip dc, [tr, ch 1] 4 times in next dc; repeat from * twice, [skip dc, dc in next dc, ch 1] twice, join in fourth ch of beg ch-5 and slip st into ch-1 space, next tr and next ch-1 space.

Round 4: Ch 6 (counts as first dc, ch 3), dc in same ch-1 space, * ch 1, skip tr, dc in next tr, [ch 1, dc in next dc] twice, ch 1, dc in next tr, ch 1, skip [ch-1 space and next tr], work [dc, ch 3, dc] in next ch-1 space; repeat from * twice, ch 1, skip tr, dc in next tr, [ch 1, dc in next dc] twice, ch 1, dc in next tr, ch 1, join in third ch of beg ch-6 and slip st into ch-3 space.

Round 5: Ch 1, work [sc, ch 3, sc] in same ch-3 space, [ch 3, sc in next ch-1 space] 5 times, ch 3, sc in next ch-3 space, ch 1; holding joined Squares close to work with WS's facing each other and as shown in diagram, * slip st  to corresponding ch-3 space of joined Squares, ch 1, sc in same ch-3 space of Square 6, * [ch 1, slip st  to next ch-3 space of joined Squares, ch 1, sc in next ch-1 space of Square 6] 5 times, ch 1, slip st  to next ch-3 space of joined Squares, ch 1, sc in next ch-3 space of Square 6, ch 1, slip st  to next ch-3 space of joined Squares, ch 1, sc in same ch-3 space of Square 6; repeat from * once more, work [ch 3, sc in next ch-1 space] 5 times, ch 3, join in first sc.

Fasten off.

Continue joining Square Motifs 1 – 6 in the same order, adjusting the final row as necessary when joining sides, until a total of 24 Squares have been joined.

 

BORDER

Join yarn with slip st to unworked ch-3 space of corner to begin working along a short side.

Round 1: Ch 1, work [sc, ch 3, sc] in same ch-3 space, * ch 3, sc in next ch-3 space; repeat from * to within next ch-3 space of corner (remember to count the joined ch-3 space of individual Squares as a ch-3 space), ch 3, [sc, ch 3, sc] in corner ch-3 space **; repeat from * to ** around, join in first sc and slip st into ch-3 space.

Round 2: Ch 3, work [dc, ch 3, 2 dc] in same ch-3 space, * ch 1, work 2 dc in next ch-3 space; repeat from * to within ch-3 space of corner, ch 1, work [2 dc, ch 3, 2 dc] in ch-3 space of corner **; repeat from * to ** around, join in third ch of beg ch-3 and slip st into next dc and into ch-3 space.

Round 3 (optional Cork-screw Fringe worked on short ends): Ch 1, work [sc, ch 3, sc] in same ch-3 space, * ch 17, work 2 dc in third ch from hook, 3 dc in each rem ch, sc in next ch-1 space, ch 3, sc in next ch-1 space; repeat from * to within ch-3 space of corner, ch 17, work 2 dc in third ch from hook, 3 dc in each rem ch, work [sc, ch 3, sc] in ch-3 space of corner; ch 3, [sc in next ch-1 space, ch 3] along long side to within ch-3 space of corner, work [sc, ch 3, sc] in ch-3 space of corner **; repeat from * to ** around, join in first sc.

Fasten off.

 

FINISHING

Using yarn needle, weave in all ends.

 

Motif Wrap Diagram

 

See this pattern and more in 23 Free Flower Crochet Patterns and Other Girly Crochet Projects.

 

Your Recently Viewed Projects

Leave a Comment

Rate

Cancel Reply to Comment

Thanks for your comment. Don't forget to share!

I'm a beginner and would love to make this for someone. But I find the directions very confusing. Also how many skeins are used in this wrap? One? Two? Three? It doesn't say, only what yarn was used. I wish there were more visuals, photos or video, to explain the pattern. And the stitches. I tried following them and it's just not coming out right. -(

i wish they included a pattern diagram. i depend on them so much when i crochet. it helps me visualize what i am doing! the design is so pretty, though!

I am not sure about something. I think r 5 on the first motif should be on all motifs and that it is the joining round, however the instructions for motifs 2-6 say to fo at the end of r 4. Am I right that you need to add r 5 and join it to r 5 of the other motifs? Ive made some practice motifs but without a joining round they ate too small. Also, should you do r 5 from m 1 on all motifs if you are sewing together later?

I am in the proces of making it, but do not get the "join as you go" method. It says Skip the last row and crochet it later while joining.... But how....? Can it be that that part of the explanation is left out? It only explains how to go about without joining th squares on the go. Can anyone shed some light on this? I would love to understand this technique. For now I'll stick to sewing them together

Sorry, haven't read the instructions well enough. The join as you go method is described in the last round. Just not in that of motive 1, obviously.... If you're an administrator feel free to delete my comment!

Ah... thanks. Still would you need a r5 even if joining at the end of project?

Hard to follow pattern

I love, love,love it! But I was wondering, can fc provide these patterns with a diagramed pattern? I think this would make it easier for crocheters to have a better vision of all patterns provided here.

Great idea! Unfortunately patterns like this come directly to us from companies...so unless they provide us with a chart, we don't have one :( If there is a crocheter out there who would like to write one up for this pattern, or any of the patterns on our site for that matter, we'd be happy to add them and credit you! Thanks!

I may start doing that. It is very frustrating to have to read through rows and rows of written instructions and lose your place, when a chart would make it so much easier and provide an overview.

Same goes for knitting patterns, by the way!

It is a beautiful scarf!!

Close

Report Inappropriate Comment

Are you sure you would like to report this comment? It will be flagged for our moderators to take action.

Thank you for taking the time to improve the content on our site.

Close Window